Ich-zapfe
Komplett uppsättning Öltapp STREAM 50 ölkassett, flödeskylare 1 linje torrkylare
Item number NEW-6741
Manufacturer: ich-zapfe
Products from EU
Complete set - STREAM 50 1-line home draft beer pump dispenser, beer machine, beer cooler
Consists of:
- Beer dispenser STREAM 50 Beer case, flow cooler 1-conductor dry cooler
- Pressure reducer 1-line CO2 for beer dispenser 3bar
- CO2 - bottle, 2,0 kg
- CO2 hose complete, 1.5 m
- Beer hose John Guest - 3/8" and 5/8" screw-on connector 2.00 m - completely finished!
- Carbonic acid key "captive"
- Dispensing head, your choice: without, flat, combi, basket, Köpi, 5 litre drum adapter
Beer dispenser STREAM 50 Beer case, flow cooler 1-line dry cooler
STREAM 50 1-line beer dispenser 45 liters/h, beer case, flow cooler, dry cooler
3 min unpack… 2 min set up… 1 min connect = endless enjoyment.
A cold, clear, freshly tapped beer - you deserve it!
The STREAM 50 1lt beer cooler is for professional cooling and serving Excellent chilled beer at home, at garden parties and for medium-sized commercial use.
- Control range
+2 to +10 degrees - Performance:
45 L/h at 10°C TD - Cooling technology
is 45% more efficient - Ready for use
in just 2-4 minutes
If the thermostat is set to max., the thermoblock will (after approx. 10 minutes) accumulate a high amount of energy, thereby enabling several chilled beers to be served one after the other.
The cooling technology of the STREAM 50 tap system is around 45%
more efficient than the electrical power consumption.
The beer is cooled down to the tap.
The cooling loops are made of stainless steel and are therefore stable and durable
The materials used meet the highest
hygiene standards and enable the cooler to have a long service life.
STREAM 50 1lt - and the cold beer flows from 1 taps
With its strong cooling performance and perfect dimensions, the STREAM 50 dispensing system is one of the leading 1-line table/under-table coolers on the market.
Cooling capacity of 80 to 90 glasses (0.5 liters) of excellently chilled beer per hour.
The powerful STREAM 50 compressor ensures minimal energy consumption and an excellently chilled beer without foaming
Continuous cooler STREAM 50 1ltg. - Efficiency, performance, enjoyment
The thermoblock of the STREAM 50 beer tap system has a high energy capacity, meaning that a perfectly chilled beer can be tapped after just 2-4 minutes.
If the thermostat is set to max., the thermoblock will accumulate a high amount of energy (after approx. 10 minutes), allowing several chilled beers to be served in a row.
The cooling technology of the STREAM 50 tap system is around 45% more efficient than the electrical power consumption.
The beer is cooled down to the tap.
The cooling loops are made of stainless steel and therefore stable and durable.
The materials used meet the highest
hygiene standards and enable the cooler to have a long service life.
STREAM 50 flow cooler - technical data
The noble STREAM 50 dry cooler weighing only 32 kg is equipped with a 7mm cable.
Dimensions: W/D/H/ 213х410х390 (including drip tray)
Voltage: 220V, 50 Hz, 296W, 1.16A
Compressor: 1/6 HP
Line: 1 x types of beer
Housing:Metal, powder-coated, rust-proof
High quality of workmanship and packaging
STREAM 50 - Top in the class of 1-line tap systems
The STREAM 50 beer cooler is one of the best in the “dispensing systems
up to 45 l/h” category in terms of cost, performance and quality ratio.
Easy cleaning of the STREAM 50 system
With the following cleaning set, you can easily and conveniently clean the STREAM 50 dispensing system after use:
Cleaning set Easy(recommended)
Beer cooler STREAM 50 - easy to use - TOP in performance
It's tapped in just a few steps:
Unpack the tap system
Connect the pressure reducer to the CO2 bottle with the
carbon dioxide key and tighten it
Connect the CO2 hose from the pressure reducer to the nozzle head
Connect the beer hose to the tap head and insert it into the tap system
and secure it
Prick the barrel
Tap pressure on pressure reducer onetell
Connect the dispenser to the socket
Adjust the pressure and enjoy a cold beer
You can find all components in the complete set or as accessories in our shop
RESPONSIBLE PERSON IN THE EU
An economic operator established in the EU who ensures that the product complies with all required regulations.
HAJUS AG; Hr. Stanislav Maer
Lise-Meitner-Straße, 7
30926
Seelze
Germany
kundenservice@ich-zapfe.de
+49 5151 87798 10
Fast delivery We deliver fast. With DHL your package will be with you in a short time!
Top Quality Highest quality products from world leading manufacturers!
Customer satisfaction More than 90% of our customers are satisfied & recommend us to others.
Sicherheit Sicheres Online-Shopping mit SSL-Zertifikat.
