JET 30 1-line home draft beer pump dispenser, beer machine, 40 liter/h beer cooler
Beer dispenser JET 30, through-flow cooler 1-line dry cooler, up to 40 liters / h
You can tap in just a few simple steps:
Unpack the dispenser
Connect the pressure reducer to the CO2 bottle with the carbon
dioxide key and tighten it
Connect the CO2 hose from the pressure reducer to the
dispensing head
Connect the beer hose to the dispensing head, plug it into the
dispensing system and fix it
Pierce the barrel
Set the dispensing pressure on the pressure reducer
Connect the dispenser to the socket
Adjust the pressure and enjoy a cold beer
JET 30 - Top in the class of 1-line dispensing systems
The JET 30 beer dispenser is in the “Dispensing systems
up to 40 l / h” category, one of the best in terms of
cost, performance and quality ratio.
With the following cleaning set, you can clean the JET 30
dispenser easily and conveniently after use:
Cleaning set Easy (recommended)
JET 30 through-flow cooler - technical data
The noble JET 30 dry cooler with a weight
of only 17 kg is equipped with a 7mm cable.
Dimensions: W / D / H / 180х422х405 (including drip tray)
Voltage: 230V, 50 Hz, 267W, 1,16A
Compressor:1/4 PS
Management:1 x types of beer
Casing:Metal, powdered, rust-proof
High quality of workmanship and packaging
Through-flow cooler JET 30 1 lines. - Efficiency, performance, enjoyment
The thermoblock of the JET 30 beer dispenser has a high energy capacity,
This means that a perfectly chilled beer can be tapped after just 2-4 minutes. If
the thermostat is set to max., the thermoblock (after approx. 10 minutes)
Accumulate a large amount of energy, thereby enabling several chilled beers to be served one after the other.
The cooling technology of the JET 30 dispenser is around 45% more efficient than the electrical power consumption.The beer is cooled down to the tap.
The cooling loops are made of stainless steel and are therefore stable
and durable The materials used meet the highest hygiene standards and enable the cooler to have a long service life.
JET 30 1lt - and the cold beer flows out of 1 taps
With its strong cooling performance and perfect dimensions, the beer dispenser JET 30 is one of the leading 1-pipe table / under-table coolers on the market.
Cooling capacity of 70 to 80 glasses (0.5 liters) of excellent chilled beer per hour,
The powerful JET 30 compressor ensures minimal energy consumption and an excellently chilled beer without foaming
If the thermostat is set to max., The thermoblock (after approx.
10 minutes) will get a high amount to accumulate in energy, and
thereby a serving of allows several chilled beers in a row.
The cooling technology of the JET 30 dispenser is around 45%
more efficient than the electrical power consumption.
The beer is cooled down to the tap.
The cooling loops are made of stainless steel and
thus stable and durable.
Continuous cooler, dry cooler
Unpack for 3 minutes… set up for 2 minutes… connect for 1 minute =
unlimited enjoyment. A cold, clear, freshly tapped one - you deserve it!
The beer dispenser JET 30 1lt is for professional cooling and serving
of excellently chilled beer at home, at garden parties
and intended for medium-sized commercial use.
Control range
+2 to +10 degrees
Power:
40 L / h at 10 ° C
TD
Cooling technology
is 45% more
efficient
Ready to use
in just 2-4 minutes
