Beer dispenser, Beer Pump AS-200, 4 / 6 / 8 line for choice, flow cooler, wet cooler - under counter, Green Line

   Capacity: 200 L/h at 10°C TD

Ready for use in just a few minutes

Cooling loops (to choose from):

• 4 cooling loops (2x19m and 2x14m long)
• 6 cooling loops (2x19m, 2x14m and 2x10m long)
• 8 cooling loops (2x14m, 2x10m and 4x9.5m long)

Modern and robust design guarantees long life and easy transport

Cooling technology is 45% more efficient

 Green Line - environmentally friendly

Technical details:

• Cooling power of the compressor (HP): 3/4
• Cooling power of the compressor (W): 2000
   
• Maximum cooling capacity to 0°c / tk 45°c (l/hour): 200
• Continous cooling performance (l/hour): 150
• Thermal gradient Δt(°c): 10
• Ice bank (kg): 10-30
• Displacement of recirculation pump (m): 8
• Recirculation connection: 1/2
• Number of cooled beverages: 4
• Length of cooling coils (m): 2x19, 2x14
• Diameter of cooling coil (mm): 7x8
• Power (W): 782
• Amperage (A): 3,40
• Net weight (kg): 42.5
• Dimensions (mm): 661 x 423 x 539 (WxDxH)
• Refrigerant type: R290
• Voltage (V): 220-240V 50Hz~1
• Beverage connection: 3/8"
• Air connection: 1/2"

The AS-200 beer cooler is designed for professional cooling of drinks in smaller restaurants, bars and inns.

The cooling unit is equipped with a water pump with a buoyancy of 8m, so the cooler can be located in the cellar or basement without any problems and yet, thanks to the auxiliary cooling, the beer is perfectly cooled all the way to the tap.

Cooling capacity of 200 L / H The cooling loops run through the top cover plate and are equipped with quick connectors (John Guest), this makes it easy to connect the beverage lines.

The modern Lindr compressor cooling unit uses the power supply for direct transfer for cooling, thus guaranteeing minimal energy consumption.

Lindr cooling technology is 45% more efficient than electrical power consumption. All cooling loops are made of stainless steel.

The materials used meet the highest hygiene standards and guarantee a long service life for this cooler.

Two carrying handles on the sides enable cooler for easier handling.

With its performance and state-of-the-art technology, the AS series belongs to the top of the range of professional cooling units.

RESPONSIBLE PERSON IN THE EU

An economic operator established in the EU who ensures that the product complies with all required regulations.

HAJUS AG; Hr. Stanislav Maer

Lise-Meitner-Straße, 7

30926

Seelze

Germany

kundenservice@ich-zapfe.de

+49 5151 87798 10